Therefore™ MFP Application
All connected MFPs are listed under the MFP note. By right-clicking on the node, users can access the settings, default settings, and RBAC configuration for the connected MFP devices.
The Therefore™ MFP application has its own manual:
Settings
When a value is entered into a format field it will override the default format set for the operating system setting. Any type of separator, except letters, may be used (e.g. "/" or ".")
Date Format
Enter the date format that should be used by the MFP device.
| Format | Restrictions |
|---|---|
|
Format |
Restrictions |
d |
Double (01) or single digit (1) |
dd |
Only double-digit (01) |
M |
Double (01) or single digit (1) |
MM |
Only double-digit (01) |
yy |
Only last two digits (09) |
yyyy |
Must be full date (2009) |
Time Format
Enter the time format that should be used by the MFP device.
| Format | Restrictions |
|---|---|
h |
The hour, using a 12-hour clock from 1 to 12. |
hh |
The hour, using a 12-hour clock from 01 to 12. |
H |
The hour, using a 24-hour clock from 0 to 23. |
HH |
The hour, using a 24-hour clock from 00 to 23. |
m |
The minute, from 0 through 59. |
mm |
The minute, from 00 through 59. |
s |
The second, from 0 through 59. |
ss |
The second, from 00 through 59. |
Timeout
The amount of time the system will wait before logging the user out after successfully saving a document to Therefore™. If uniFLOW is used the user is returned to the splash screen. The default value for this setting is 30 seconds.
Webservice Port
The port which is used for webservice communication. The default is 80.
File Transfer Port
The port which is used for file transfer. This port must not be the same as the webservice port and both ports must be free. The default is 8373.
Use secure connection (https and secure socket)
If this option is checked, the MFP Application will use https for communication with the web service and a secure socket connection for the file transfer.
About Certificates
The settings Store, Location, and Thumbprint on the lower part of the dialog allow the user to enter values from a certificate.
The user can enter an official certificate. Certificates are available via certificate authorities.
Please refer to the relevant Microsoft documentation to get started on certificates:
https://learn.microsoft.com/en-us/windows/win32/seccrypto/makecert