uniFLOW or Universal Login Manager Integration

If the uniFLOW/Universal Login Manager is installed, then login works via uniFLOW/Universal Login Manager, and logging into the MFP Application is not necessary. Instead of a login screen a splash screen will be opened from which the application can be started.

To benefit from uniFLOW or Universal Login Manager functionality in your Therefore™ system, configure as detailed below.

Version Requirements

uniFLOW

Canon imageRUNNER ADVANCE devices require uniFLOW server version 4.0.5 or later and uniFLOW Login Manager jar file version 2.4.0 or later.

Universal Login Manager

Canon imageRUNNER ADVANCE devices require uniFLOW server version 5.2 or later and Universal Login Manager version 4.0.2 or later.

The Universal Login Manager must run in uniFLOW server mode in order to automatically log in to Therefore™. Please see NT-ware documentation here: https://www.nt-ware.com/ulm/manuals/5.9/HTML/EN/index.htm#21843.htm If the Universal Login Manager is NOT in uniFLOW server mode, automatic login to Therefore™ is not possible. In this case, the Login Manager setting of the Therefore™ MFP Application must be set to 'Ignore Login Manager' in the Therefore™ Solution Designer under Default MFP Settings.

Configuration

1. Install and configure the Therefore™ MFP Application.

2. In the file "PublicKey.txt", which can be found in the Therefore™ installation folder, there is a modulus and an exponent in a similar format to that shown below:

   Copy

   <Modulus>b31b20dfe6604fc8ceef7acea653691015</Modulus><Exponent>010001</Exponent>

3. Configure uniFLOW server using the modulus and exponent from "PublicKey.txt". See NT-ware documentation here:

   https://www.nt-ware.com/mom/2024.2/HTML/EN/index.htm#15053.htm